Kramer-electronics SID-X3N Manuale Utente Scaricare il pdf (Pagina 13)

SID-X3N - Connecting the SID-X3N

To connect a remote step-in switch and LED as illustrated in the example in

Figure 4:

1. Connect pins 2 and 3 from the terminal block to the remote step-in switch.

2. Connect pin 1 from the terminal block to the anode of the remote step-in

LED.

3. Connect pin 3 from the terminal block to the cathode of the remote step-in

LED.

5.2 Connecting the Remote Select Switch and LED

You can connect a remote, contact closure, input selection switch to activate an

input (momentary contact is sufficient to switch inputs), as well as an indicator

LED to the terminal block on the rear panel of the SID-X3N.

Figure 5 illustrates the connections from the terminal block to the switch and LED.

Figure 5: Remote Select Switch and LED Wiring

To connect a remote selection switch and LED as illustrated in the example

in Figure 5:

1. Connect pins 2 and 3 from the terminal block to the remote selection switch.

2. Connect pin 1 from the terminal block to the anode of the remote selection

LED.

3. Connect pin 3 from the terminal block to the cathode of the remote selection

LED.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 21 22

Nessun commento

Kramer-electronics SID-X3N Manuale Utente Pagina 13