Kramer-electronics VP-790 Manuale Utente Scaricare il pdf (Pagina 41)

VP-790 - Firmware Upgrade

8.2 Saving User Settings

If you want to backup the user settings before upgrading the machine, you can do it

through the VP-790 Web pages. To do so, type the local IP address for the VP-790

in the Web browser’s address bar and press the ENTER button.

You can obtain/set the IP address via the OSD menu by entering the Network

Setup submenu within the Setup Menu or by connecting the VP-790 to an Ethernet

based network with the default DHCP setting to allow the VP-790 to obtain a valid

IP address from the network server.

Following firmware upgrade you may find that the VP-790 user settings have been

reset to their factory default values. If you wish to restore the user settings, you can

do it via the VP-790 Web pages.

8.3 Updating the Firmware

To upgrade the firmware:

1. Power down the VP-790.

2. Press and hold the menu button and turn the power On again. After a few

seconds, you can release the MENU button.

The VP-790 enters the firmware update mode.

3. Start the VP-790 Updater Tool application.

Figure 23: Updater Tool Window

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 47

Nessun commento

Kramer-electronics VP-790 Manuale Utente Pagina 41