Kramer-electronics VM-2DP Manuale Utente Scaricare il pdf (Pagina 9)

6 VM-2DP - Connecting the VM-2DP 1:2 DisplayPort Distributor

5 Connecting the VM-2DP 1:2 DisplayPort

Distributor

Always switch OFF the power on each device before connecting it to

your VM-2DP. After connecting your VM-2DP, connect its power and

then switch on the power on each device.

To connect the VM-2DP, as the example in Figure 2 shows, do the following:

1. Connect the DP source (for example, a PC with a DP output) to the INPUT

DP connector.

2. Connect the DP OUT connectors to up to two acceptors, as follows:

 DP OUT 1 connector to a display

 DP OUT 2 connector to a display

3. Connect the 5V DC power adapter to the power socket and connect the

adapter to the mains electricity.

Figure 2: Connecting a VM-2DP 1:2 DisplayPort Distributor

Display

Port

Computer

Graphics

Source

Display 1

Display 2

Display

Port

Display

Port

1 2 3 4 5 6 7 8 9 10 11 12 13

Nessun commento

Kramer-electronics VM-2DP Manuale Utente Pagina 9